Want the perfect bathroom? Don’t start planning your space until you’ve seen how the experts do it…
|
-
Conservatories
-
Photovoltaics
-
Do you own an empty home?
-
Plastic and Rubber Cladding
-
How to Get Planning Approval – Renovation/Conversion
How-to Videos
Take a look at our how to videos for advice on DIY tasks
Company Listings
![]() qpc ceramics ltd www.qpcceramics.co.uk Category: Flooring |
Grand Designs Live
The nitty gritty
- Measure your bathroom at floor level and at about 900mm from the floor - use the smaller measurement for your floor plan.
- Mark out where your hot and cold water, drains, doors, windows, electric points and any existing extractor vents are positioned.
- Everything can be moved but it can be expensive and time consuming; the soil stack (toilet waste) is the most difficult element to move.
- Decide what items you want to include in the bathroom (toilet, bath, basin etc)
- Decide what other fixings you need – mirrors, extractor fans, shaver points. In Britain electrical sockets, other than those used for shaving, are banned in the bathroom.
- Be aware that local authority regulations also stipulate that you need external ventilation, either from a window or extractor fan.
- Draw a scale plan or try an online planning guide – Ideal Standard have one at www.thebathroom.info/plan_bathroom/index.html.
- Allow space around each item to move around. You’ll need to leave: 1100x700mm around a bath; 200mm on each side of a basin and 700mm in front; 200mm on each side of the toilet and 600mm in front; and 900mm and 400mm around a shower.
- If you can’t fit in all the items you want, decide which you can relocate or do without.
- Consider your heating requirements – underfloor heating is a great space saver in a small bathroom or there are a range of statement radiators that can add real wow value to a design.
- Decide if you want to include technology such as a sound system, television screen or phone.
- Installing this early on saves a lot of hassle and cost.
- Consider your lighting needs too and bear in mind that light fittings need to meet regulatory requirements. Lights within 600 mm of a bath or shower must have an IP rating of 65; lights more than 600mm away must have an IP rating of 44.
- Standard fittings should not be used.

















